Savage 10/110 Action/Bolt Truing: For those that wish to keep standard tenon diameter for Savage Pre-fit replacement barrels, the threads will be trued perpendicular to the bolt raceway without increasing the major diameter and ensures the barrel nut can mate with the trued receiver face properly. Others may true Savage actions relative to the factory receiver threads due to the floating bolthead, however we have excellent results truing receiver threads in this manner relative to the bolt raceway. The Savage Truing Service consists of:
True the receiver face perpendicular to the bolt raceway.
True receiver threads perpendicular to the bolt raceway. These can be cut .010 over when rebarreling without a barrel nut.
Due to the floating bolthead, lap lugs to receiver lug abutments initially. If desired contact is not achieved by lapping, receiver lug abutments will be faced and a light cut will be taken across the back of the bolt lugs.
Install precision trued/ground recoil lug.
True receiver mating face of barrel nut (If you have a "smooth" barrel nut it may need to be replaced as these usually cannot be removed without damage).
Replace barrel and set minimum headspace (there may be a small charge for gauge rental if you have an uncommon /wildcat chambering).
Savage Action/Bolt Truing Service: $235! Glass bed action: $125 (NOT just a "skim bed"- your stock is set up in the mill and material removed to allow adequate depth of epoxy bedding). Action/Bolt Truing & Glass Bed Package Discount: only $335! (recommended) Install aluminum pillars: $70. Install Savage Pre-fit barrel: $95., supplied by you, or bought through us.
Remington 700 Action/Bolt Truing Service: $235. Glass bed action: (NOT just a "skim bed"- your stock is set up in the mill and material removed to allow adequate depth of epoxy bedding): $125. Action/Bolt Truing & Glass Bed Package Discount: only $335! (recommended) Barrel Fitting: We offer barrel blanks from all major manufacturers, or you may provide. Barrel fitting service includes cutting/threading receiver tenon (either standard, or .010 oversize), cutting/honing the chamber, and crowning per your specification: $275. Non-standard/wildcat chamberings may incur an additional charge for reamer/gauges. Install aluminum pillars: $70. Time bolt handle to improve primary extraction: $125.